Someone once suggested to me that it's a good idea to keep a bung near to any skin fitting - so that if it should shear off while under way, you can shove a bung in the hole as a temporary fix.
I've searched Google for a while, but can't find a source of appropriately sized bungs. Brewing shops sell them, but they're too small for my ~33mm holes.
Anyone know where I might get some?
Where Can One Buy Cork or Rubber Bungs?
Moderator: Jeff
-
- RNLI Supporter
- Posts: 148
- Joined: Thu Nov 29, 2007 9:11 am
-
- RNLI Supporter
- Posts: 148
- Joined: Thu Nov 29, 2007 9:11 am
Blimey! Just answered my own question. I emailed these guys:
http://www.leyholdings.com/
And asked where I could source bungs in quantities under 1000 as quoted on their site, and they're sending me exactly what I'm after as a free sample!
http://www.leyholdings.com/
And asked where I could source bungs in quantities under 1000 as quoted on their site, and they're sending me exactly what I'm after as a free sample!
-
- RNLI Supporter
- Posts: 148
- Joined: Thu Nov 29, 2007 9:11 am
http://www.compass24.com/watersports/ab ... ste=961050 This is the standard answer but I think your free samples should be just as good.
Derek
Derek
-
- RNLI Supporter
- Posts: 148
- Joined: Thu Nov 29, 2007 9:11 am